Brown Off – 25 L Iron Stain Remover

Iron Rust Remover Spray – Application Methodology

Removes iron stains from walls caused by contaminated borehole water. This acid based  formula safely digests iron compounds without damaging surfaces.

Safety First

• Wear gloves, eye protection, and a mask.
• Use in well-ventilated areas. Keep away from children and pets.
• Test on a small, hidden area first to ensure colourfastness.
• If contact with skin or eyes occurs, rinse immediately with water and seek medical advice if irritation persists.

How to Use

1. Prepare the Surface: Clean the wall of loose dirt or debris. Ensure it's dry.
2. Shake Well: Shake the bottle vigorously before use.
3. Spray & Apply: Hold 150 – 200mm away and spray evenly onto the stained area. Let it sit for 5 - 10 minutes to digest the iron (do not let it dry).
4. Wipe & Rinse: Gently wipe with a damp cloth (if required), then rinse thoroughly with clean water to remove residue.
5. Dry: Allow the wall to air dry completely. Repeat if needed for heavy stains.

Tips for Best Results

• Works on most painted or sealed walls; avoid unpainted drywall.
• For large areas, work in small sections to prevent drying.

Storage & Disposal

• Store in a cool, dry place away from sunlight.
• Dispose of empty container per local regulations. Do not mix with other cleaners.

DANGER – CORROSIVE PRODUCT

This product contains organic acids and can cause serious injury if mishandled.

• Causes skin irritation
  
• Causes serious eye damage
  
• Harmful if swallowed
  
• May cause respiratory irritation
  

Avoid:

• Direct contact with skin or eyes
  
• Breathing in spray mist or vapours
  
• Ingestion
  
• Use in enclosed, unventilated spaces
  

If exposure occurs:

• Eyes: Rinse immediately with clean water for at least 15 minutes and seek medical attention.
  
• Skin: Wash thoroughly with soap and water. Remove contaminated clothing.
  
• Inhalation: Move to fresh air.
  
• Ingestion: Do not induce vomiting. Seek medical assistance immediately.
  

Keep out of reach of children and pets.

When handling or applying this product, the following Personal Protective Equipment is strongly recommended:

• Eye Protection: Safety goggles or chemical splash goggles
  
• Hand Protection: Nitrile or chemical-resistant gloves
  
• Skin Protection: Long sleeves and protective clothing
  
• Respiratory Protection: Not required in well-ventilated outdoor areas - Use a NIOSH-approved respirator if ventilation is poor or spraying indoors

Hygiene:

Wash hands and exposed skin thoroughly after use.

Product Name: Iron Rust Remover Spray

Product Code: IRRS-001

Manufacturer: Brownoff Pty Ltd

Product Type: Organic acid-based rust and iron stain remover

Recommended Use:

Removal of iron and rust staining on walls caused by borehole or contaminated water.

Physical Properties:

• Appearance: Clear liquid
  
• Odour: Mild acidic
  
• pH: 1.0 – 2.0
  
• Solubility: Fully soluble in water
  
• Specific Gravity: 1.02 – 1.05
  
• VOC Content: <5%
  
• Flammability: Non-flammable
  

Stability & Reactivity:

• Stable under normal conditions
  
• Reacts with strong alkalis, oxidizers, and some metals
  
• Do not mix with bleach or ammonia
  

Storage:

• Store upright in a cool, dry place
  
• Keep container tightly closed
  
• Keep away from incompatible materials
  

Disposal:

• Neutralise before disposal where possible
  
• Dispose of contents and container in accordance with local hazardous waste regulations